Fast, Reliable Mold Remediation Across Dixon
Mold remediation in Dixon typically costs $1,800-$6,400 depending on how far the growth has spread, and most jobs take two to five days from containment to final air clearance. If you’ve found mold in your Dixon home, call (855) 915-0646 and Wade Ferris will answer his own phone. We’ve worked Dixon’s older downtown homes and the 1990s tract subdivisions on the south side long enough to know exactly where mold hides here and why it keeps coming back.
Dixon’s flat, clay-rich valley floor means even a small foundation crack or pier-and-beam settling can turn into a persistent mold source, as winter Tule fog keeps crawlspaces damp for weeks while summer heat bakes the same clay into new gaps. That’s the cycle we break. We’re Mold Remediation specialists, not a franchise crew that shows up with a spray bottle and a fan. Wade is IICRC-certified, RIA-affiliated, and he writes the 90-Day Done Right Promise into every contract. If it’s not done right, he makes it right.
Key Takeaways:
- Full mold remediation in Dixon runs $1,800-$6,400; inspection and testing alone runs $350-$750.
- Dixon’s clay soil and Tule fog season create a repeating mold cycle that bleach cleanups never stop.
- We treat the moisture source, not just the visible growth, and hand you a daily moisture log when the job’s done.
- Wade answers his own phone, 24/7. No voicemail, no answering service. He’ll have a crew in Dixon the same day.
Why Wade’s Restoration of California Is Dixon’s Preferred Mold Remediation Company
Wade Ferris founded this company in 2007 and has spent nearly two decades crawling under Dixon homes, not sending a sales rep to your door. Ask anyone on your street about the difference. The homeowner on South First Street whose 1960s slab-on-grade kept weeping moisture through a clay-heave crack? Wade took daily moisture readings, showed her the full log, and fixed the drainage so the mold didn’t come back in November.
We know Dixon’s housing stock because we’ve worked in it across every ZIP in 95620. The pre-1960s downtown homes with pier-and-beam foundations and original wood framing hold moisture different than the engineered slab pads in the newer subdivisions off Porter Road and Pitt School Road. Wade’s crew knows both failure modes. When the first real rain hits in October or November and parched clay suddenly swells, we get the call. We’ve seen that wave enough times to know exactly where water’s going to enter.
Our response time to Dixon is honest. Live person answers the phone, every hour, including holidays. Wade heads out to Dixon usually within the hour, and extraction or containment can be running the same day you call. There’s no charge for the trip inside Solano County. Wade publishes his name, his address, and his license number. He’s going to run into you again at the Dixon May Fair or the hardware store, and that’s the oldest accountability mechanism there is.
We carry IICRC and RIA credentials and run professional-grade Dri-Eaz dehumidifiers and XPOWER air scrubbers. Not rental-store fans. Wade and his team wear uniforms, background checked, and you’ll get a written scope before any work starts. No surprises at the door. Ever.
Our Mold Remediation Services in Dixon
Mold Inspection & Testing
Mold inspection in Dixon runs $350-$750 and includes a visual assessment of your crawlspace, attic, walls, and HVAC, plus air or surface sampling where needed. We look at what’s causing the moisture first. In Dixon, that usually means a perimeter crack from clay heave, a failed vapor barrier under a pier-and-beam home, or a bathroom exhaust venting into the attic rather than outside. Wade documents everything with photos and moisture readings, then hands you a written report you can take to your insurance adjuster (he’ll also talk to them directly).
Mold Removal
Mold removal in Dixon homes typically costs $1,800-$4,800 for localized growth under 100 square feet. We contain the affected area with negative air pressure, remove contaminated drywall or plaster, HEPA-vacuum framing, and treat surfaces with an antimicrobial. Then we dry the space properly. Not with box fans. With Dri-Eaz LGR dehumidifiers that pull the structure below 45% relative humidity before we rebuild. If you’re in one of the older farmhouses near downtown, that drying step matters more than anywhere else; original wood framing holds moisture like a sponge.
Black Mold Remediation
Stachybotrys, what folks call black mold, shows up in Dixon after prolonged moisture, not a one-time leak. We see it most often in the crawlspaces of older Dixon homes where winter Tule fog keeps relative humidity above 70% for weeks and the ground never really dries out. Full black mold remediation in Dixon runs $2,500-$6,400 depending on the square footage and whether structural wood needs treatment or replacement. We don’t just spray bleach (which doesn’t penetrate porous wood anyway). We treat the wood, fix the moisture source, and verify with post-remediation air sampling before we call it done.
Air Quality Restoration
After mold removal, the air in your Dixon home should test cleaner than the air outside. We run XPOWER air scrubbers with HEPA filtration during remediation and then perform post-remediation verification: a third-party air sampling that confirms spore counts dropped to normal outdoor baseline levels for Solano County. Air quality restoration is the step most companies skip, and it’s the reason mold “comes back” three months later. It never left. You just stopped seeing it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dixon
We work with homeowners across Dixon, from the older Victorians near West A Street to the 2000s subdivisions on the southeast side, and we stock the replacement materials and sealants needed for local foundation types and crawlspace configurations. That means faster turnaround when we find a failed vapor barrier or a rotted sill plate under your Dixon home. Wade doesn’t make you wait a week for parts. He brings what the job needs on the truck. Same for the equipment: Dri-Eaz dehumidifiers, Phoenix air movers, Injectidry systems, and XPOWER scrubbers are on hand, not ordered after you sign. On the inspection side, our IICRC-certified team uses the same protocols recognized by the RIA and IFA, so the written report you hand your insurer actually holds weight.
Common Mold Remediation Problems We See in Dixon Homes
- Repainting over mold without addressing the moisture source. Older Dixon homes with plaster walls and pier-and-beam foundations hide moisture behind the surface. We’ve followed too many handymen who painted over a mold stain only to have the colony regrow inside six months. Kilz doesn’t kill mold.
- Post-remediation testing that misses the baseboard gap. In slab-on-grade Dixon homes built in the 1990s and 2000s, clay heave opens a 1-2 inch gap between the slab and baseboards where moisture wicks up and mold takes hold. Most testing protocols don’t sample that gap. We do.
- Drying the living space, skipping the crawlspace. Contractors dry the kitchen or bedroom and pack up, but Dixon’s Tule fog and clay soils keep the crawlspace above 70% relative humidity for weeks every winter. That’s the reservoir. We treat the crawlspace as part of the job, every time, because in Dixon it’s the source more often than the visible room is.
- One-time fixes on a cyclical problem. Dixon’s wet winter/dry summer cycle is annual. A crack sealed in August reopens in December when the clay swells again. Our remediation includes a drainage and moisture control plan for the next cycle, so you’re not calling us back in the same room next spring.
Pricing for Mold Remediation in Dixon, CA
Here’s what you can expect to pay for mold work in Dixon, based on the jobs we’ve done in 95620:
- Mold inspection and testing: $350-$750
- Localized mold removal (under 100 sq ft): $1,800-$4,800
- Full containment and remediation (multiple rooms or crawlspace): $3,200-$6,400
- Crawlspace vapor barrier replacement: $1,200-$3,800 depending on access and square footage
- Post-remediation air clearance testing: $250-$500
What moves the number is the square footage, whether structural wood needs treatment or replacement, and how accessible the crawlspace is (some Dixon farmhouses have crawlspaces you can’t stand up in, and that slows everything down). We give you a written scope before work begins, and we hold to it. Estimates are free. Call (855) 915-0646.
We Also Serve Cities Near Dixon
Wade’s Restoration serves Dixon and the surrounding Solano and Yolo county communities, including Davis, Vacaville, Winters, and Woodland. The same owner answers the phone, the same written 90-Day Done Right Promise applies, and there’s still no trip charge inside Solano County. Call (855) 915-0646 and you’ll get Wade, not a call center.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Dixon
Bleach doesn’t penetrate porous materials like drywall, plaster, or wood framing, and it does nothing to stop the moisture source that fed the mold. In Dixon, that source is usually a clay-heave crack in a slab foundation or a pier-and-beam crawlspace staying damp through Tule fog season. Until the moisture path is sealed and the area is dried below 45% RH, the mold colony regrows. Call (855) 915-0646 and Wade will show you the moisture readings, not just spray and leave.
Dense Tule fog from December through February keeps Dixon’s exterior surfaces and crawlspaces damp for weeks at a time, even without rain. With flat terrain and clay soil holding groundwater near the surface, crawlspace relative humidity regularly exceeds 70% during fog season; mold needs about 60% to grow. A proper vapor barrier and dehumidification plan for the crawlspace is the fix that lasts, not a one-time drying.
Check for the gap between the slab and the baseboard. In Dixon’s 1990s and 2000s subdivisions, seasonal clay expansion and contraction opens hairline cracks along the slab perimeter, and moisture wicks up through those gaps straight into the baseboard and drywall. That’s not a cleaning problem. It’s a moisture path problem, and it needs to be sealed and dried, not repainted. Wade will confirm with a moisture meter in about ten minutes.
Yes. Most of the pier-and-beam farmhouses in Dixon sit over dirt crawlspaces with no vapor barrier or a torn one, and the ground moisture migrates up into the floor joists and sill plates. Add Dixon’s fog season and you get sustained wood moisture content above 20%, which is exactly the threshold where mold and wood rot begin. It doesn’t take a flood. Just time and humidity.
We run post-remediation air sampling inside the contained area and compare it to an outdoor baseline sample from your Dixon property. If indoor spore counts match or fall below the outdoor baseline, the remediation worked. We also hand you the full daily moisture log from start to finish, so you can see the structure actually dried, not just that we said it did. Call (855) 915-0646 for an exact quote.
Call Wade’s Restoration for Mold Remediation in Dixon, CA
If you’ve got mold in your Dixon home, you want the person who answers the phone to be the person who shows up. That’s Wade Ferris. He’s been doing restoration work since 2007, he publishes his address and license number, and he writes the 90-Day Done Right Promise on every mold contract. If it’s not done right, he makes it right. Call (855) 915-0646 now for a free estimate. He’ll answer.
Written by Wade Ferris, Owner at Wade’s Restoration of California, serving Dixon and nearby communities for over 29 years.