Fast, Reliable Fire & Smoke Damage Restoration Across Century City
Fire and smoke damage restoration in Century City typically costs $1,800-$4,200 for a moderate kitchen fire in a condo unit, and $6,000-$18,000+ when smoke travels through shared risers into stacked neighboring units. Most Century City jobs can have a crew on-site within 60-90 minutes because we stage equipment nearby and know the tower access protocols. Call (855) 915-0646 and you’ll get Wade himself on the line, not a call center.
Century City is not like the single-family neighborhoods around it. The residential towers along Century Park East, Century Park West, and Century Hill are post-tension concrete high-rises, and fire and smoke behave differently inside them. Soot doesn’t just linger in the unit where the fire started. It travels through shared chases, HVAC returns, and corridor air gaps, settling into units three, six, even ten floors away. Restoring those spaces correctly means understanding post-tension construction, HOA access rules, and the way smoke maps vertically through a building, not just horizontally across a room.
Wade Ferris has been answering his own phone since 2007, and he knows the buildings in 90067. When you call, you get a straight answer about what happened, what needs to happen next, and what it will cost before anyone steps onto your floor. No national chain playbook. No estimate that doubles at the door.
Why Wade’s Restoration of California Is Century City’s Preferred Fire & Smoke Damage Restoration Company
We’ve worked inside Century City towers long enough to know the difference between a unit problem and a building problem. That matters because the fix is completely different. A unit problem is one damaged kitchen and some soot on the ceiling. A building problem is smoke odor spread through a shared riser affecting 12 stacked units, which is exactly what we handled after the January 2025 Palisades Fire blanketed the district in ash. We know what building management needs from us and what the HOA will ask for, and we document everything the way adjusters and boards expect.
Wade’s crew arrives in uniform, background-checked, and with equipment from Dri-Eaz and Phoenix that actually pulls smoke odor and fine ash out of the air instead of masking it. Every job is covered by the 90-Day Done Right Promise, stamped in writing. If the odor comes back or the soot wasn’t fully removed, Wade comes back. One call and he’s on the road.
Here is his cell: (855) 915-0646. You’re not getting a queue. You’re getting the owner.
Our Fire & Smoke Damage Restoration Services in Century City
Smoke & Soot Removal
In Century City’s high-rise units, smoke and soot rarely stay where the fire started. They ride air currents through elevator shafts, stairwells, and shared HVAC systems, depositing acidic residue on glass, chrome, stone, and painted surfaces in neighboring units. We clean soot from every surface type common in Century City condos, from floor-to-ceiling glass to polished stone counters, without scratching or etching. Time matters here: soot left on marble or glass more than 72 hours can permanently etch the finish.

Odor Removal & Deodorization
Smoke odor in a Century City tower is a vertical stack problem, not a single-unit one. We deploy hydroxyl generators and HEPA air scrubbers from Dri-Eaz and Phoenix, and we map the odor path through chases and shared ducts before we treat anything. Treating only the origin unit while smoke stink lives in the riser means the smell comes back in three weeks. We treat the path, not just the room.

Contents Cleaning & Pack-Out
After a fire in a Century City condo, we inventory and pack out salvageable contents, clean them off-site, and return them when the unit is restored. Luxury towers mean luxury contents: designer furniture, art, wine collections, wardrobes. We document every item with photos before anything leaves the unit, which is what your adjuster and your HOA both want to see. You get a full contents log, not a vague count.

Emergency Board-Up & Tarping
A broken window or burned balcony door in a Century City tower needs to be secured immediately, both for weather and for building security. We board up openings the same day and tarp balconies and roof penetrations so ash, rain, and birds stay out while permanent repairs are scheduled. Building management usually requires this within hours of a fire, and we move that fast.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Century City
Our crews work with equipment from Dri-Eaz and Phoenix, the same brands professional restoration teams across the country rely on. In Century City’s concrete towers, we stock HEPA air scrubbers, hydroxyl generators, and LGR dehumidifiers sized appropriately for high-rise units, and we keep the parts and filters those units need on our trucks so we aren’t waiting on a supply run mid-job. That matters when you have 12 stacked units to deodorize before the HOA deadline. We carry RIA and IFA credentials, and the work is held to IICRC standards on every job.
Common Fire & Smoke Damage Restoration Problems We See in Century City Homes
- Smoke traveling through vertical chases instead of staying in one unit. Century City’s towers share plumbing risers, electrical chases, and HVAC shafts across every floor. Smoke from a fire on the 9th floor settles on the 12th and 15th, and the smell spreads long after the fire is out. You can’t treat one unit and call it done.
- Drilling into post-tension cables during restoration work. The floors and walls in Century City’s towers are post-tension concrete. Cutting or drilling without GPR scanning can sever a cable under tension, causing sudden structural failure and liability across every unit that shares that slab. No penetration happens on our jobs until the area is scanned and cleared.
- HOA access delays that let soot etch glass and stone permanently. In luxury towers, soot and ash are acidic. The longer building management delays access while they sort out who’s responsible, the more likely permanent etching is on marble, glass, and chrome. We work directly with HOAs and building managers to get access fast, because we’ve seen what a 5-day delay does to a $15,000 stone countertop.
- Soot spread through HVAC systems even when the fire never touched those units. Century City’s glass-curtain-wall towers pull outside air through rooftop intakes. During the Palisades Fire, fine ash entered those intakes and circulated through dozens of units that were never near a flame. Cleaning the affected unit without cleaning the shared ductwork means the odor comes back.
Pricing for Fire & Smoke Damage Restoration in Century City, CA
Here is what Century City condo owners can expect to pay, based on the work we do in 90067:
| Service | Typical Range in Century City |
|---|---|
| Smoke & soot removal (single unit, moderate fire) | $1,800 - $4,200 |
| Odor removal & deodorization (stacked units, up to 5 floors) | $4,500 - $9,800 |
| Contents cleaning & pack-out | $2,400 - $7,500 |
| Emergency board-up & tarping | $350 - $1,200 |
| Full structural fire repair (post-tension coordination included) | $8,000 - $18,000+ |
Cost is driven by how far smoke traveled vertically, what surfaces soot landed on, and how much GPR scanning and HOA coordination is required. High-rise work in Century City costs more than single-family restoration in Culver City or West Hollywood because access, liability documentation, and post-tension constraints add real hours. Call (855) 915-0646 for an exact quote. Estimates are free, and there is no trip charge inside Los Angeles County.
We Also Serve Cities Near Century City
Our Fire & Smoke Damage Restoration team works throughout the Westside, including Century City and the surrounding cities of Beverly Hills, Culver City, West Hollywood, and Santa Monica. If you’re in 90067 or just across the city line, the same crew and the same 90-Day Done Right Promise apply.
Serving Century City, CA - Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fire & Smoke Damage Restoration in Century City
We treat it as a vertical stack problem from the first hour. We moisture-map the chase and the shared riser to identify every affected floor, then deploy equipment to each unit based on where smoke actually settled, not just where the fire was. In Century City’s post-tension towers, the origin unit and the most damaged unit are rarely the same, so we map first and clean second. Call (855) 915-0646 and Wade will walk you through what the mapping looks like for your building.
We moisture-mapped the vertical chase to confirm no hidden water migration, then deployed HEPA air scrubbers and hydroxyl generators from Dri-Eaz and Phoenix throughout 12 stacked units. We coordinated with the HOA to clean shared ducts and deodorize each unit’s contents, and we completed the work without a single drill penetration beyond GPR-cleared zones. The odor was gone in all 12 units, and the HOA signed off. That is the kind of multi-unit job we do regularly in Century City.
Century City’s residential towers are post-tension concrete. Severing one post-tension cable can cause sudden structural failure and massive liability that extends across every unit that shares that slab. GPR scanning tells us exactly where those cables, conduits, and rebar are before any penetration happens. It adds a step and a few hundred dollars to a job, and skipping it is the most expensive mistake a restoration crew can make in 90067.
We handle HOA and building management communication directly. That means obtaining access requests, scheduling elevator time and loading dock windows, documenting insurance and liability requirements, and providing the written scope of work boards ask for before crews enter. You never relay information between Wade and your building. He deals with both sides, and you get copied on everything.
We use HEPA air scrubbers, hydroxyl generators, and LGR dehumidifiers from Dri-Eaz and Phoenix, sized for high-rise space volumes and positioned only after GPR clearance confirms safe placement. No drilling, no cuts, no penetration without scanning first. The equipment does the heavy lifting, but the mapping and the clearance work ensure it doesn’t do damage on the way out. Call (855) 915-0646 to get Wade’s assessment of your building’s specific situation.
Written by Wade Ferris, Owner at Wade’s Restoration of California, serving Century City since 2007.
Call Wade’s Restoration of California for Fire & Smoke Damage Restoration in Century City
If your Century City condo or tower has smoke damage, soot spread, or a fire odor that won’t leave, call (855) 915-0646. You’ll get Wade on the phone, a straight answer about what you’re dealing with, and a free estimate with no trip charge inside Los Angeles County. Wade’s crew is background-checked, uniformed, and equipped with professional-grade Dri-Eaz and Phoenix equipment. The 90-Day Done Right Promise is in writing on every job. If it isn’t done right, Wade makes it right.